3M TA580 AT019447419 Hard Hat - Type 2 Polycarbonate - Unvented - Reflective Tape - Plastic Lamp Bracket - Chin Strap - 6 Point Pinlock - White

Features

• The Australian made 3M TA580 unvented polycarbonate safety helmet type 2 with comfortable 6 point terylene head harness is the central building block providing users with a face head inhering certified protection system if needed
  
• It is designed to protect wearers from numerous hazards and compliments a number of accessories
  
• The helmet consists of a shell and a suspension system called a harness
  
• The shell provides the impact protection by deflecting whilst the harness absorbs the shock and load
  
• The transmission of force is dissipated through the shell, harness by stretching and dissipating it down through the body to the ground
  
• The basics point harness provides the cushioning by stretching and spreading the load evenly over the protected area
  
• The 25mm wide webbing maximises the surface area contact with the wearer's head and enhances stability security of the helmet
  
• The area between the shell and harness is the shock absorption zone and should not be treated as a storage location when worn

Applications

• Suitable for general use in industry for protection of the upper part of the wearer's head
  
• The TA 580 unvented safety helmet has been designed to meet the requirements of AS/NZS 1801 for shock absorption, resistance to penetration, lateral stiffness, ignition by flame an electrical installation electrical hazards up to 650 V when tested in the hot (50°C), cold (-5°C) and wet conditions
  
• Type 2 polycarbonate safety helmets are suitable for higher temperature work applications such as welding and smelting

Specifications

• Reflective Tape included
  
• Chin Strap included
  
• Poly Head Lamp Bracket included
  
• Shell material - Injection moulded polycarbonate
  
• Vented or Unvented - Unvented
  
• Harness Cradle - 25mm Nylon webbing 6 point
  
• Weight - 296g (weight differs with colours)
  
• Harness Segments - Injection moulded HDPE (High Density Polyethylene)
  
• Adjustment Range - 50 - 66cm
  
• Harness Headband - Injection moulded LDPE (Low Density Polyethylene)
  
• Harness Sweatband - Foam backed terry towelling
  
• Shell Colour - White
  
• Australian made
  
• Type 2 polycarbonate shell for higher temperature work applications
  
• Lightweight 341 gm
  
• Comfortable 6 PT Terry Lane head harness
  
• Fit all head sizes 50 to 66 centimetres
  
• Rain gutter
  
• Terry tail sweatband absorber (replaceable)
  
• 25 mm moulded slots accept all safety helmet accessories (cap attach earmuffs and visors)
  
• PPE combinations have been tested as an approved combination under AS/NZS 1804:1997, AS/NZS 1337:1992, AS/NZS 1270:2002

Minimum sell quantity:

Order Quantity Multiple: