3M TA580 AT019447443 Hard Hat - Type 2 Polycarbonate - Unvented - Reflective Tape - Chin Strap - 6 Point Pinlock Suspension - White

Features

• The Australian made 3M TA580 unvented polycarbonate safety helmet type 2 with comfortable 6 point terylene head harness is the central building block providing users with a face head inhering certified protection system if needed


• It is designed to protect wearers from numerous hazards and compliments a number of accessories. The helmet consists of a shell and a suspension system called a harness. The shell provides the impact protection by deflecting whilst the harness absorbs the shock and load


• The transmission of force is dissipated through the shell, harness by stretching and dissipating it down through the body to the ground. The basics point harness provides the cushioning by stretching and spreading the load evenly over the protected area


• The 25mm wide webbing maximises the surface area contact with the wearer's head and enhances stability security of the helmet. The area between the shell and harness is the shock absorption zone and should not be treated as a storage location when worn


• Australian made


• Type 2 polycarbonate shell for higher temperature work applications


• Lightweight 341 gm


• Comfortable 6 PT Terry Lane head harness


• Fit all head sizes 50 to 66 centimetres


• Rain gutter


• Terry tail sweatband absorber (replaceable)


• 25 mm moulded slots accept all safety helmet accessories (cap attach earmuffs and visors)


• PPE combinations have been tested as an approved combination under AS/NZS 1804:1997, AS/NZS 1337:1992, AS/NZS 1270:2002


• Reflective tape

Applications

• Suitable for general use in industry for protection of the upper part of the wearer's head


• The TA 580 unvented safety helmet has been designed to meet the requirements of AS/NZS 1801 for shock absorption, resistance to penetration, lateral stiffness, ignition by flame an electrical installation electrical hazards up to 650 V when tested in the hot (50°C), cold (-5°C) and wet conditions


• Type 2 polycarbonate safety helmets are suitable for higher temperature work applications such as welding and smelting

Specifications

• Tape included


• Shell material - Injection moulded polycarbonate


• Vented or Unvented - Unvented


• Harness Cradle – 25mm Nylon webbing 6 point


• Weight – 296g (weight differs with colours)


• Harness Segments – Injection moulded HDPE (High Density Polyethylene)


• Adjustment Range – 50 – 66cm


• Harness Headband – Injection moulded LDPE (Low Density Polyethylene)


• Harness Sweatband – Foam backed terry towelling


• Shell Colour – White

Minimum sell quantity:

Order Quantity Multiple: