Sun Hydraulics Check Valve - Free Flow Nose to Side - CXBAXCN

Features
 • Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction
 • Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions
 • Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min)
 • Will accept 5000 psi (350 bar) at ports 1 and 2
 • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals
 • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations

Specifications

 • Cavity : T-13A
 • Series : 1
 • Capacity : 6 gpm
 • Maximum Operating Pressure : 5000 psi
 • Maximum Valve Leakage at 110 SUS (24 cSt) : 10 drops/min.@5000 psi
 • Manual Override Force Requirement : 5 lbs/1000 psi @ Port 1
 • Manual Override Stroke : .10 in.
 • Response Time - Typical : 50 ms
 • Switching Frequency : 15,000 max. cycles/hr
 • Solenoid Tube Diameter : .75 in.
 • Valve Hex Size : 7/8 in.
 • Valve Installation Torque : 30 - 35 lbf ft
 • Model Weight : 0.65 lb.
 • Seal kit - Cartridge : 990413007
 • Seal kit - Cartridge : 990413002
 • Seal kit - Cartridge : 990413006
 • Seal and nut kit - Coil : 990770006

Minimum sell quantity:

Order Quantity Multiple: