Phoenix Contact 2866789 - Primary-Switched Quint Power Supply - For Din Rail Mounting - Input: 1-Phase - Output: 24 V DC - 40 A

Features

QUINT POWER power supplies with maximum functionality

QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effectivesystem protection

The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports criticaloperating states before errors occur

Reliable starting of heavy loads takes place via the static power reserve POWER BOOST

Thanks to the adjustable voltage, all ranges between 5V DC ... 56 V DC are covered

Your advantages For superior system availability

Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal current for 12 ms

Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently

Preventive function monitoring

Specifications

Ambient conditions

Degree of protection IP20

Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C

Derating: 2.5 %/K)

Ambient temperature (start-up type tested) -40 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)

Climatic class 3K3 (in acc. with EN 60721)

Degree of pollution 2

Installation height 4000 m

Input data

Nominal input voltage range 100 V AC ... 240 V AC120 V DC ... 300 V DC (UL 508: ≤ 250 V DC)

Input voltage range 85 V AC ... 264 V AC90 V DC ... 300 V DC (UL 508: ≤ 250 V DC)

Dielectric strength maximum 300 V ACAC frequency range 45 Hz ... 65 Hz

Frequency range DC 0 Hz

Discharge current to PE < 3.5 mA

Current consumption 8.8 A (120 V AC)4.6 A (230 V AC)9.5 A (110 V DC)4.7 A (220 V DC)

Nominal power consumption 1157 VA

Inrush current < 15 A (typical)

Mains buffering time > 35 ms (120 V AC)> 35 ms (230 V AC)

Input fuse 20 A (slow-blow, internal)

Recommended breaker for input protection 16 A ... 20 A (AC: Characteristics B, C, D, K)

Power factor (cos phi) 0.88

Type of protection Transient surge protection

Protective circuit/component Varistor, gas-filled surge arrester

Output data

Nominal output voltage 24 V DC ±1 %Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)

Nominal output current (IN) 40 A (-25 °C ... 60 °C, UOUT = 24 V DC)

Minimum sell quantity:

Order Quantity Multiple: