Morey's 422180-SRA1 - Super Red (SR) Arctic Wide Temperature EP1 Semi-Fluid Grease - 180kg Drum

Features
 • MOREY’S® SR ARCTIC WIDE TEMP EP GREASE is a premium, heavy duty, EP Multi-Purpose Lithium Complex grease fortified with polymers, anti-wear agents, tackiness additives, high viscosity base oils, synthetics, plus rust and oxidation inhibitors
 • This grease is designed to “stay in place” under the most severe operating conditions found in industrial and automotive service
 • It is surpassed in resisting water wash out and protecting against wear in shock loading applications
 • MOREY’S® SR ARCTIC WIDE TEMP EP GREASE is the grease designed “to stay there and lubricate” under the worst conditions of water-dirt-mud and reduced temperatures
 • Adhesive tacky grease that “stays in place”
 • Unexcelled water washout resistance due to high viscosity base oils fortified with polymers
 • Excellent protection against failures caused by shock loading
 • Extreme pressure protection – Exceeds 60lbs (27kg) OK Load in the ASTM D-2509 Timken Test
 • Critical metal surfaces of moving parts are protected from rust and corrosion
 • Distinctive red colour quickly identifies the grease and helps detect defective bearing seals
 • Reduced maintenance expense because “stay in place” attribute means less frequent greasing intervals and extended equipment life
 • Oxidation inhibitors permit operations up to 150ºC
 • NLGI Certified GC-LB wheel bearing and chassis applications
 • Wide operating temperature range from -40ºC to + 150ºC
 • Excellent low temperature torque

Applications
 • Recommended for wheel bearings, including disc brake applications, fifth wheels U-joints, steering linkage, and chassis lubrication.
 • An ideal chassis lubricant for “off road” equipment in agriculture, construction, logging, trucking and mining service where severe water washing or shock loading protection is needed.
 • Also recommended for rock crushers, sand and gravel screens, oil field equipment, off shore and marine deck equipment.
 • Recommended for industrial plain bearings and antifriction bearings operating under shock loads or wet and dirty conditions.
 • Recommended for Motorcycle suspension components, linkage and bearings.
 • For all foam or fibre Air Filters where a water and dust seal is needed.
 • NOT RECOMMENED FOR SMALL ANTI FRICTION BEARINGS OPERATING OVER 5000 RPM.

Minimum sell quantity:

Order Quantity Multiple: