Sun Hydraulics Pressure Compensated Flow Control Valve with Reverse Flow Check - Fully adjustable - FDCBLAN

Features
 • Fully adjustable, pressure-compensated flow controls with reverse-flow check provide precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations
 • They are infinitely adjustable from nearly closed up to the maximum flow
 • An integral high-capacity check valve provides unrestricted flow from port 2 to port 1
 • All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size)
 • However, cartridge extension dimensions from the mounting surface may vary
 • A balanced adjustment mechanism allows for easy adjustment even at high pressures
 • The sharp-edged orifice design minimizes flow variations due to viscosity changes
 • Minimum leakage is .2 gpm (0,8 L/min) when the adjustment mechanism is turned to the shut-off position
 • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids
 • Exposure to petroleum based fluids, greases and lubricants will damage the seals

Specifications

 • Cavity : T-5A
 • Series : 2
 • Capacity : 12 gpm
 • Maximum Operating Pressure : 5000 psi
 • Adjustment - No. of CCW Turns from Fully Closed to Fully Open : 5
 • Valve Hex Size : 1 1/8 in.
 • Valve Installation Torque : 45 - 50 lbf ft
 • Adjustment Screw Internal Hex Size : 5/32 in.
 • Locknut Hex Size : 9/16 in.
 • Locknut Torque : 80 - 90 lbf in.
 • Model Weight : 0.61 lb.
 • Seal kit - Cartridge : 990203007
 • Seal kit - Cartridge : 990203014
 • Seal kit - Cartridge : 990203006

Minimum sell quantity:

Order Quantity Multiple: