Sun Hydraulics Free Flow Nose to Side Check Valve - CXHAXAN

Features
 • Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction
 • Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions
 • Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min)
 • Will accept 5000 psi (350 bar) at ports 1 and 2
 • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids
 • Exposure to petroleum based fluids, greases and lubricants will damage the seals
 • Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section)
 • For further details, please see the Materials of Construction page
 • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations

Specifications

 • Cavity :- T-16A
 • Series :- 3
 • Capacity :- 80 gpm320 L/min.
 • Maximum Operating Pressure :- 5000 psi350 bar
 • Maximum Valve Leakage at 110 SUS (24 cSt) :- 1 drops/min.0,07 cc/min.
 • Valve Hex Size :- 1 1/4 in.31,8 mm
 • Valve Installation Torque :- 150 - 160 lbf ft203 - 217 Nm
 • Model Weight :- 0.94 lb.0.42 kg.
 • Seal kit - Cartridge :- Buna: 990016007
 • Seal kit - Cartridge :- EPDM: 990016014
 • Seal kit - Cartridge :- Polyurethane: 990016002
 • Seal kit - Cartridge :- Viton: 990016006

Minimum sell quantity:

Order Quantity Multiple: