Sun Hydraulics Directional Spool Valve - Solenoid-operated - 3-Way - DMDAMAN

Features
 • This solenoid-operated 3-way, 2-position cartridge is a direct-acting, balanced spool directional valve
 • The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service
 • Spools B and R are closed in the transition between their two positions
 • This results in a higher performance limit at the expense of lower capacity
 • When used as pilot controls, where capacity is not a factor, the closed transition will provide faster and more consistent response times
 • This valve is direct actuated and requires no minimum hydraulic pressure for operation
 • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids
 • Exposure to petroleum based fluids, greases and lubricants will damage the seals
 • On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation
 • The D, L and T manual control assemblies have a mechanical life expectancy of approximately 7,000 cycles
 • This valve utilizes a wet armature design
 • This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil
 • This can be a factor if the coil is energized for long periods of time
 • Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge
 • Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction
 • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations

Specifications

 • Cavity :- T-11A
 • Series :- 1
 • Capacity :- 12 gpm45 L/min.
 • Maximum Operating Pressure :- 5000 psi350 bar
 • Maximum Valve Leakage at 110 SUS (24 cSt) :- 5 in³/min.@3000 psi80 cc/min.@210 bar
 • Manual Override Force Requirement :- 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1
 • Manual Override Stroke :- .10 in.2,5 mm
 • Response Time - Typical :- 50 ms50 ms
 • Switching Frequency :- 15,000 max. cycles/hr15,000 max. cycles/hr
 • Solenoid Tube Diameter :- .75 in.19 mm
 • Valve Hex Size :- 7/8 in.22,2 mm
 • Valve Installation Torque :- 30 - 35 lbf ft41 - 47 Nm
 • Model Weight :- 0.74 lb.0.33 kg.
 • Seal kit - Cartridge :- Buna: 990411007
 • Seal kit - Cartridge :- EPDM: 990411014
 • Seal kit - Cartridge :- Viton: 990411006
 • Seal and nut kit - Coil :- Viton: 990770006

Minimum sell quantity:

Order Quantity Multiple: