Grundfos Pump - Vertical Multistage Centrifugal - CRIE 1-6 NV-FGJ-A-E-HQQE - 0.55kw - 200-240 V - 50/60 Hz - 99244826

Features
CRIE 1-6 NV-FGJ-A-E-HQQE
 • Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline)
 • Pump materials in contact with the liquid are in stainless steel
 • A cartridge shaft seal ensures high reliability, safe handling, and easy access and service
 • Power transmission is via a rigid split coupling
 • Pipe connection is via combined DIN-ANSI-JIS flanges
 • The pump is fitted with a 1-phase, fan-cooled, permanent-magnet, synchronous motor
 • The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2
 • The motor includes a frequency converter and PI controller in the motor terminal box
 • This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement
 • The operating panel on the motor terminal box features a four-inch TFT display, push-buttons and the Grundfos Eye indicator
 • The display gives an intuitive and user-friendly interface to all functions
 • The push-buttons are used to navigate through the menu structure to access pump and performance data on site and enable setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop"
 • Communication with the pump is also possible by means of Grundfos GO Remote (accessory).
 • The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption"
 • The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
 • "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
 • "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
 • "Alarm": Motor has stopped (flashing red indicator lights)
 • The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required:
 • Two dedicated digital inputs
 • Three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V; the factory-fitted pressure sensor is connected to one of these inputs
 • 5 V voltage supply to potentiometer and sensor
 • One analog output, 0-10 V, 0(4)-20 mA
 • Two configurable digital inputs or open-collector outputs
 • Two Pt100/Pt1000 inputs
 • LiqTec, dry-running protection sensor input
 • Grundfos Digital Sensor input and output
 • 24 V voltage supply for sensors
 • Two signal-relay outputs (potential-free contacts)
 • GENIbus connection
 • Interface for Grundfos CIM fieldbus module

Applications
Suitable for:

 • Commercial air conditioning
 • Commercial fire protection
 • Commercial heating
 • Commercial water pressure boosting
 • District cooling
 • District heating
 • Machining
 • Industrial cleaning process
 • Industrial cooling
 • Industrial heating
 • Desalination
 • Industrial process water treatment
 • Industrial water supply & transfer
 • Industrial wastewater treatment & reuse
 • Drinking water treatment
 • Irrigation
 • Solar water solutions
 • Surface water intake
 • Water distribution
 • Drip micro spray
 • Frost protection
 • Pivot pressure boosting

Specifications

 • Pumped liquid: Water
 • Liquid temperature range: -20 .. 120 °C
 • Selected liquid temperature: 20 °C
 • Density: 998.2 kg/m³

Technical:

 • Pump speed on which pump data are based: 3380 rpm
 • Actual calculated flow: 2.074 m³/h
 • Resulting head of the pump: 40.66 m
 • Maximum head: 53.5 m
 • Stages: 6
 • Impellers: 6
 • Number of reduced-diameter impellers: 0
 • Low NPSH: N
 • Pump orientation: Vertical
 • Shaft seal arrangement: Single
 • Code for shaft seal: HQQE
 • Approvals on nameplate: CE,EAC,UKCA,WRAS,ACS
 • Curve tolerance: ISO9906:2012 3B
 • Pump version: NV
 • Model: A

Electrical Data:

 • Motor standard: IEC
 • Motor type: 71A
 • IE Efficiency class; IE5
 • Rated power - P2: 0.55 kW
 • Power (P2) required by pump: 0.55 kW
 • Mains frequency: 50 / 60 Hz
 • Rated voltage: 1 x 200-240 V
 • Rated current: 3.45-2.90 A
 • Cos phi - power factor: 0.98
 • Rated speed: 360-4000 rpm
 • Efficiency: 85.3%
 • Motor efficiency at full load: 85.3 %
 • Enclosure class (IEC 34-5): IP55
 • Insulation class (IEC 85); F
 • Motor protec: ELEC
 • Motor No: 98362270

Materials:

 • Base: Stainless steel, EN 1.4408, AISI 316
 • Impeller: Stainless steel, EN 1.4301, AISI 304
 • Material code: A
 • Code for rubber: E
 • Bearing: SIC

Controls:

 • Control panel: Graphical
 • Function Module: FM300 - Advanced
 • Frequency converter: Built-in
 • Pressure sensor: Y

Installation:

 • Maximum ambient temperature: 50 °C
 • Maximum operating pressure: 25 bar
 • Max pressure at stated temp: 25 bar / 120 °C, 25 bar / -20 °C
 • Type of connection: DIN / ANSI / JIS
 • Size of inlet connection: DN 25/32
 • Size of outlet connection: DN 25/32
 • Pressure rating for connection: PN 25
 • Flange rating inlet: 300 lb
 • Flange size for motor: FT85
 • Connect code: FGJ

Others:

 • Minimum efficiency index, MEI ≥: 0.70
 • Net weight: 25.7 kg
 • Gross weight: 28.6 kg
 • Shipping volume: 0.143 m³

Minimum sell quantity:

Order Quantity Multiple: