DeWalt DCG405FN-XJ Cordless Brushless Angle Grinder With Flat Head - Skin - 18V - 125mm x 5inch

Features

• E-CLUTCH™


• The electronic torque limiting clutch reduces the maximumtorque
  reaction transmitted to the operator in case of jamming of a disc.
  This feature also prevents the gearing and electric motor from
  stalling. The torque limiting clutch has been factory set and cannot
  be adjusted


• ELECTRONIC BRAKE


• Stops the wheel quickly when the trigger is released


• NO VOLT


• The No-volt function stops the grinder restarting without the switch
  being cycled if there is a break in the power supply


• SOFT START


• The soft start feature allows a slow speed build-up to avoid an
  initial jerk when starting. This feature is particularly useful when
  working in confined spaces


• ANTI-VIBRATION SIDE HANDLE


• The anti-vibration side handle offers added comfort by absorbing the
  vibrations caused by the tool


• POWER-OFF™ OVERLOAD PROTECTION


• The power supply to the motor will be reduced in case of motor
  overload. With continued motor overload, the tool will shut off. The
  switch will need to be released then depressed to restart tool. The
  tool will power off each time the current load reaches the overload
  current value (motor burn-up point). If continued overload shutdowns
  occur, apply less force/weight on the tool until the tool will
  function without the overload engaging


• KICKBACK BRAKE™


• When a pinch, stall, or bind-up event is sensed, the electronic brake
  engages with maximum force to quickly stop the wheel, reduce the
  movement of the grinder, and shut the grinder off. The switch will
  need to be released then depressed to restart tool

Specifications

• Voltage: 18V


• Power output: 800W


• Max disc diameter: 125mm


• Spindle thread: M14


• Length: 310mm


• Weight: 1.8kg


• 3 Year Dewalt Australia Warranty

Minimum sell quantity:

Order Quantity Multiple:

Catalogue Page Number: 13-39