Dulux - Luxathane-R Recoatable Gloss Polyurethane - Part A - White - 3.2L

Features

LUXATHANE® R is a full gloss, two-component acrylic polyurethane that is recoatable with minimum surface preparation

It is designed for general use in atmospheric chemical and marine service where gloss and colour retention, hardness and abrasion resistance, and wide-ranging chemical resistance are required

It may be used in new construction and maintenance services over properly primed steel, galvanised steel, concrete or hardwood timber

LUXATHANE® R may be applied directly over all Dulux® epoxy primers and universal primers or over recommended high-build epoxy intermediate coats

It may be effectively used over aged tightly adhering epoxy and other coatings subject to necessary solvent resistance tests and appropriate surface preparation

Very Good Weathering and Chemical Resistance

Very Good Abrasion Resistance and Toughness

Easy to Apply and Maintain

Specifications

WEATHERABILITY Very good gloss and colour retention on exterior exposure

SOLVENTS Excellent resistance to splash and spillage of common alcohols, aliphatic and aromatic hydrocarbons, esters and ketones

HEAT RESISTANCE Up to 120°C dry heat

WATER Excellent resistance to fresh and salt water but not suitable for immersion

SALTS Excellent resistance to most salt solutions

ALKALIS Good resistance to splash and spillage of most common alkalis

ACIDS Suitable for splash and spillage of mild acids

ABRASION Very good when fully cured

VOLUME SOLIDS 46% (White) COATING THICKNESS (MICRONS)

VOC LEVEL <490 g/L (White, untinted) Min Max Recommended

FLASH POINT 16°C Wet film per coat (μm) 85 130 110

POT LIFE 4 - 6 hours (4 litre kit, 25°C) Dry film per coat (μm) 40 60 50

MIXING RATIO V/V Part A: 4

Minimum sell quantity:

Order Quantity Multiple: