Wago - Compact 2-Pole Splicing Connector Ex - 0.5 .. 6.0 mm² 37A with Operating Levers - Transparent - *221-511 Carrier Required - Pack 50 - 221-682

Features

• Ease of use – pull the lever up, insert a conductor and push the lever back down


• Available as 2-, 3- and 5-wire connectors


• Easily terminate conductors from 0.5 to 6 mm²


• Connection of all conductor types


• Time savings for installers and device manufacturers


• Quickly install devices with higher levels of power consumption


• Safely install long cable runs with larger conductor cross sections


• Mounting carrier for installation conforms to standards


• Working voltages of 275 V or 440 V


• ATEX (Ex 2 II G), IECEx (Ex eb IIC Gb) Zone 1, 2


• IECEX (Ex eb IIC Gb), American Ex (AEx eb IICGb) / Class 1, Zone 1


• Width 16 mm / 0.63 inch


• Height 10.1 mm / 0.398 inch


• Depth 21.1 mm / 0.831 inch


• Weight 3 g


• Color transparent


• Flammability class per UL94 V2


• Color of actuator light gray

Specifications

• Electrical data


• Ratings per IEC/EN 60664-1


• Ratings per EN 60664


• Approvals per UL 1059


• Rated voltage UL (Use Group C) 440 V


• Rated current UL (Use Group C) 30 A


• Approvals Ex


• Ratings per ATEX: PTB 19 ATEX 1001 U / IECEx: PTB 19.001 1U (Ex eb IIC Gb)


• Rated voltage EN (Ex e II) 440 V


• Rated current (Ex e II) 37 A


• Connection data


• Connection technology CAGE CLAMP®


• Actuation type Lever


• Connectable conductor materials Copper


• Nominal cross-section 6 mm²


• Solid conductor 0.5 … 6 mm² / 20 … 10 AWG


• Stranded conductor 0.5 … 6 mm² / 20 … 10 AWG


• Fine-stranded conductor 0.5 … 6 mm² / 20 … 10 AWG


• Strip length 12 … 14 mm / 0.47 … 0.55 inch


• Total number of connection points 2


• Total number of potentials 1


• Wiring type Side-entry wiring


• Safety information 1:


• The permissible operating voltage of the connector with carrier (440 V or 275 V) depends on the mounting type


• Safety information 2:


• Only approved in conjunction with a mounting carrier (221-511). Other carriers are possible, see certificate/file


• The connectors must be installed in an enclosure meeting the requirements of a recognized protection type per EN 60079-0, Section 1 or EN 60079-31


• When installing the connectors in an enclosure of protection type “eb” (increased safety) per EN 60079-7, the clearances and creepage distances of Table 2 for this standard must be observed


• See point 1 for the use of accessories


• The connectors can be used both in Group II and Group I, as the standard requirements are identical in this case


• The use of these components requires a new assessment by a notified certification agency

Minimum sell quantity:

Order Quantity Multiple: