Fluke TL225 SureGrip™ Stray Voltage Adaptor Test Lead Set

Features

• It makes sure the meter has a low input impedance that eliminates stray voltages

• On energized wires, the meter will indicate the real voltage

• On non-energized circuits the meter will read close to zero (even if there are stray voltages)

• It can be used with all modern meters with standard input spacing

Applications

• Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized

• This is called stray or ghost voltages and is caused by the capacity between wires

• Because of the very high impedance input of the meter, this stray voltage has nowhere to go which will lead to an incorrect reading on the meter

• The solution is to make sure there is a lower impedance across the input terminals of the meter

• However, this is not as easy as it seems since it is vital that the safety of the electrician is not compromised

Specifications

• Rated CAT III 1000 V, CAT IV 600 V

Minimum sell quantity:

Order Quantity Multiple: