VICTRON Energy Quattro QUA481030010 - 48/10000/140-100/100 Inverter Pure Sine Wave/Charger VE Bus - 230V

Features

• Two AC inputs with integrated transfer switch- The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators


• The Quattro will automatically connect to the active source


• Two AC Outputs- The main output has no-break functionality


• The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected


• This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption


• The second output is live only when AC is available on one of the inputs of the Quattro


• Loads that should not discharge the battery, like a water heater for example, can be connected to this output


• Virtually unlimited power thanks to parallel operation- Up to 6 Quattro units can operate in parallel


• Six units 48/10000/140, for example, will provide 48kW / 60kVA output power and 840 Amps charging capacity


• Split phase options- Two units can be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30kW / 36kVA of split phase power


• Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240V / 60Hz


• Three phase capability- Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity


• PowerControl – Dealing with limited generator, shore side or grid power- The Quattro is a very powerful battery charger


• It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC)


• A current limit can be set on each AC input


• The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded


• PowerAssist – Boosting shore or generator power- This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source


• Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery


• When the load reduces, the spare power is used to recharge the battery


• Solar energy: AC power available even during a grid failure- The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems


• Loss of mains detection software is available


• System configuring-


• In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure


• Parallel and three phase applications can be configured with VE


• Bus Quick Configure and VE


• Bus System Configurator software


• Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications)


• On-site Monitoring and control- Several options are available: Battery Monitor, Multi Control Panel, Color Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232)


• Remote Monitoring and control- Victron Ethernet Remote, Venus GX and the Color Control Panel


• Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge


• Remote configuring- When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be changed

Specifications

• Input voltage range (V DC): 38 – 66V


• Output:


• Output voltage: 230 VAC ± 2%


• Frequency: 50 Hz ± 0,1%


• Cont. output power at 25°C (VA): 10000


• Cont. output power at 25°C (W): 8000


• Cont. output power at 40°C (W): 6500


• Cont. output power at 65°C (W): 4500


• Peak power (W): 20000


• Maximum efficiency (%): 96


• Zero load power (W): 60


• Zero load power in AES mode (W): 40


• Zero load power in Search mode (W): 15

Minimum sell quantity:

Order Quantity Multiple: