Fantech Trade - External Louvre Grill - Slimfit DPL - 200 x 60 x 200mm (HxWxL) - DPL150

Features

The Slimfit external louvre grille has been specifically designed to fit directly onto the spigot of an EDM-300 fan so that it can be installed into narrow walls

The louvre grille and fan combination enables installations into walls from 99mm to 130mm

By using the optional, purpose designed Spacer Plate (up to 3), installations into walls from 45mm to 98mm thick are possible

Made from UV-stabilised ABS Plastic

Available with 150mm spigot only

Comes with flywire mesh sheet to eliminate entry of insects

The external louvre grille shall be of the Slimfit DPL type as designed and manufactured by Fantech Pty Ltd

It shall fit directly onto the spigot of an EDM-300 fan to enable installations into walls from 99mm to 130mm

A Spacer Plate must be available to enable installations into walls from 45mm to 98mm thick

Both louvre grille and Spacer Plate shall be made from UV-stabilised ABS Plastic

A flywire mesh sheet must be incorporated into the grille

Special Note:

Where fitted to wall fans with butterfly wing style backdraft dampers that open past the end of the spigot, the backdraft damper may be obstructed if the louvre grille is directly connected to the spigot

A wall tube or duct spacer should be used

Applications

Ideal for installations that use various types of sandwich wall panel, ie mining accommodation huts (Dongas), portable homes, portable site offices and portable toilets

Can be installed into narrow panel wall applications from 45 to 130mm thick such as mining accommodation huts, portable homes and site offices

Can also be used in thicker walls or ducted applications using wall tube or flex duct

Specifications

Testing:

Air flow tests based on ISO5801:2007

Minimum sell quantity:

Order Quantity Multiple: