JB A31852 Tee Swivel - With Depressor Nut on branch 1/4inch fl (3)

Features

1/4" FE SAE swivel tee with depressor, nut on branch

Package of 3

Add multiple ports with just one fitting. Swivel flare connections offer a safe, simple installation without the need for brazing

All of the flare ends are tapped to receive access cores. One core and cap are packaged with each valve

Same item without depressor, order A31854

JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc

This gives our brass fittings and access valves high tensile strength while resisting corrosion

Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces

Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged

All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends

All pipe connections have internal braze cups for dip tube applications

All valves are equipped with cap and one valve core (braze type, loosely assembled)

Temperature range -40 degrees to +250 degrees Fahrenheit (-40 to 121.1 degrees Celsius)

Valve core is stainless steel and brass for use with all refrigerants including R-410A

Resistant to oils, alkalites, and diluted mineral acids

Made in the USA

Applications

HVAC/R JB Industries Swivel Tee Depressor for the air conditioning and refrigeration industry

Minimum sell quantity:

Order Quantity Multiple: