Honeywell Notifier NFX/MCP/GLASS Intelligent Indoor Call Point Red - 93mm(h) x 89mm(w) x 59.5mm(d)

Features
 • The NOTIFIER range of addressable manual call points are designed to provide a manual alarm interface to NOTIFIER’s fire alarm control panel
 • Installation efficiency, flexibility and compliance with AS7240.11 are at the heart of the call point range
 • Both break glass, and re-settable operating elements (PS210) can be used in the standard unit
 • Operation of the resettable element, as well as being indicated by the units LED, is also indicated by a yellow strip on the element which becomes visible when activated
 • With the addition of a hinged transparent cover (PS200) the element may be protected against accidental operation and may be further protected by using a cover seal (PS056) which requires breaking in order to operate the unit
 • The call points use one of 159 possible addresses (99 for WCP) which is simply ‘dialled in’ using the two rotary decade switches on the rear of the unit
 • A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved


Specifications

 • Two wire connection for easy installation
 • Anti-tamper facility.
 • Enhanced aesthetics and compact design
 • Resettable element available
 • Simple rotary decade setting
 • Integral LED controlled from panel

Minimum sell quantity:

Order Quantity Multiple: