WMIS WMI-50LF Conduit - 50mm x 4m

Features

WMIS Locfit Galvanized to AS/NZ1397- Conduits are manufactured from BHP in line galvanized steel tube

It has an accurate circular cross section, a uniform wall thickness and continuously welded seams

The interior and exterior surfaces are thoroughly and evenly coated with zinc via the inline process

WMIS Locfit Conduit can be supplied in a Heavy Duty Galvanized finish, Galvanizing is carried out to Australian Standard 4680-2006. and AS/NZ1397

The conduit comes in standard 4 meter lengths up to 63mm and 6 meters for larger sizes, including coupling, as per Australian Standard specification 2053.7

Applications

WMIS Conduit can be installed indoors or outdoors, in dry or wet locations, exposed or concealed, in all kinds of atmospheric conditions, and in hazardous locations

It provides excellent mechanical protection for the conductors while reducing Electro-Magnetic field exposure and shielding against Electro-Magnetic Interference

Specifications

Instructions for Assembling Conduit Fittings to Metal Conduit:

Apply a bead of 638 Loctite sealant or equivalent approximately 10mm back from edge of conduit, so that when it enters the conduit fittings it will create a seal and still maintain the integrity of the conduit continuity

Push or tap metal conduit firmly into the 1,2,3,4 way Junction boxes, Bends, Elbows, Adaptors or couplings until conduit reaches the end stop in the conduit fittings collar

This may be achieved by holding the conduit with Multigrips or Vice Grips and tapping it into the fitting with a Hammer, Mallet or like tool

The notch in the conduit fitting will cut into the conduit, thus creating continuity and also locking conduit in so it is not easily removed

The thread on standard screwed conduits can be fitted directly into these conduit fittings

Australian Engineered and Designed to meet AS2053.7

Storage: It is highly recommended that Steel Conduit be stored in a dry area until used

Minimum sell quantity:

Order Quantity Multiple: