Schneider Electric Vigirex 56290 Residual Current Monitoring Relay - Front Panel Mounting - RH99P - 30mA To 30A - 12/24V AC - 50/60Hz - 12/48V DC

Features

Protection: when detecting significant leakage current in the line it monitors, the relay trips the breaker at the top end of it, through its shunt trip auxiliary

Monitoring: signalling leakage current by LED, bargraph or digital display on front, and by an output dry contact. Available in single-line and multi-line variants monitoring up to 12 different distribution lines.

Residual current sensitivity ranging from 30 mA to 30 A, fixed or adjustable, for A type relays,
and 30 mA to 3 A for B type relays

Trip time delay ranging from 0 to 4.5 seconds, fixed or adjustable
o Networks with operating voltage up to 1000 V, and frequency up to 400 Hz
o lines with current carrying capacity up to 3200 A
o main switchboards (at the foot of the transformer) in most demanding industrial environments (overvoltage withstand category IV)

Type A or type B as per IEC 60 755

Compliant with standards:
o IEC 60 755 and IEC 60947-2 appendix M (certificates by Kema laboratories available)
o UL 1053 listed, CSA C22.2 N° 144 for North-America
o EAC for Russia, CCC for China

DIN profile, to clip on rail or secure on backplate

72x72mm, for switchboard front plate or door mounting, using clips
o Closed toroids; for new installations (new switchboards or extensions), with cable capacity up to 630 A for A type relays, 250 A for B type relays
o Rectangular sensors; for lines with capacity up to 3200 A (busbars, or cables above 630 A)
o Split toroids; to equip distribution lines already in operation, with cable capacity up to 250 A

Applications

Electrical networks operating with voltage above 500 V (up to 1000) or frequency higher than 60 Hz (up to 400)

Distribution lines with capacity 630 A and above (up to 3200)

Upgrade of switchboards already in operation

Monitoring and protection at the root of power distribution

Three-phase supplied loads including rectifiers : lifts, cranes, HVAC, high-power speed drives, UPS...

Single-phase DC boost power supply in some electric vehicle chargers

Loads including single-phase speed drives: washing machines, air-conditioning units, heat pumps, food processors)

power supply network equipped with harmonic filters

Specifications

 • Range of product : Vigirex
 • Relay application : Monitoring relay
 • Range : Vigirex
 • Range compatibility : Vigirex Vigirex RH TOA earth leakage current sensor
 • Device short name : RH99P
 • Product or component type : Residual current protection relay
 • Range compatibility : Vigirex Vigirex RH A earth leakage current sensor
 • Ik Degree Of Protection : Ik07 Conforming To EN 50102
 • Type Of Setting : Selector
 • Mechanical Robustness : Fire ResistanCE Conforming To IEC 60695-2-1
 • Ik Protection 2 Joules: Ik07 Conforming To EN 50102
 • Vibrations 13.2...100 Hz: 0.7 G
 • Vibrations 2...13.2 Hz: +/- 1 mm
 • Earth Leakage Current : 0.03-30 A
 • Height : 72 mm
 • Ambient Air Temperature For Operation : -35-70 °C
 • Type Of Measurement : Earth Fault Current Internal Measurement, Range: 80...100 %
 • Network Rated Voltage : 1000-1000 V - Ac At 50/60 Hz (Maximum)
 • 1000-1000 V - Ac At 400 Hz (Maximum)
 • [Ithe] Conventional Enclosed Thermal Current : 8 A
 • Earthing System : Tt
 • Tn-S
 • Electromagnetic Compatibility : Conducted And Radiated Emissions: , B, Conforming To Cispr 11
 • Conducted Radio-Frequency Immunity Test: , 3, Conforming To IEC 61000-4-6
 • Electrostatic Discharge Immunity Test: , 4, Conforming To IEC 61000-4-2
 • High-Energy Conducted Susceptibility: , 4, Conforming To IEC 61000-4-5
 • Low-Energy Conducted Susceptibility: , 4, Conforming To IEC 61000-4-4
 • Radiated Susceptibility: , 3, Conforming To IEC 61000-4-3
 • Net Weight : 0.3 Kg
 • Tamperproof Of Settings : Protected By Sealable Cover
 • Range : Vigipact
 • Wire Stripping Length : Auxiliary Power Supply: 7 mm
 • Fault: 7 mm
 • Relay Test And Fault Reset: 7 mm
 • Sensor: 7 mm
 • Voltage Presence: 7 mm
 • Residual Earth-Leakage Time Delay Adjustment Type : Instantaneous For 0.03-0.03 A
 • Adjustable 9 Settings 0-4.5 S For 0.03-30 A
 • Connections - Terminals : Auxiliary Power Supply: Terminal Block Cable(S) 0.2-2.5 mm² Flexible Awg 24...Awg 12
 • Auxiliary Power Supply: Terminal Block Cable(S) 0.2-2.5 mm² Rigid Awg 24...Awg 12
 • Auxiliary Power Supply: Terminal Block Cable(S) 0.25-2.5 mm² Flexible With Ferrule Awg 24...Awg 12
 • Fault: Terminal Block Cable(S) 0.2-2.5 mm² Flexible Awg 24...Awg 12
 • Fault: Terminal Block Cable(S) 0.2-2.5 mm² Rigid Awg 24...Awg 12
 • Fault: Terminal Block Cable(S) 0.25-2.5 mm² Flexible With Ferrule Awg 24...Awg 12
 • Relay Test And Fault Reset: Terminal Block Cable(S) 0.2-2.5 mm² Flexible Awg 24...Awg 12
 • Relay Test And Fault Reset: Terminal Block Cable(S) 0.2-2.5 mm² Rigid Awg 24...Awg 12
 • Relay Test And Fault Reset: Terminal Block Cable(S) 0.25-2.5 mm² Flexible With Ferrule Awg 24...Awg 12
 • Sensor: Terminal Block Cable(S) 0.2-2.5 mm² Flexible Awg 24...Awg 12
 • Sensor: Terminal Block Cable(S) 0.2-2.5 mm² Rigid Awg 24...Awg 12
 • Sensor: Terminal Block Cable(S) 0.25-2.5 mm² Flexible With Ferrule Awg 24...Awg 12
 • Voltage Presence: Terminal Block Cable(S) 0.2-2.5 mm² Flexible Awg 24...Awg 12
 • Voltage Presence: Terminal Block Cable(S) 0.2-2.5 mm² Rigid Awg 24...Awg 12
 • Voltage Presence: Terminal Block Cable(S) 0.25-2.5 mm² Flexible With Ferrule Awg 24...Awg 12
 • Residual Earth-Leakage Sensitity Adjustment Type : Adjustable 9 Settings
 • Power Consumption In VA : 4 Va
 • [Us] Rated Supply Voltage : 12...24 V AC 50/60 Hz 55...120 %
 • 12...48 V DC 55...120 %
 • Pollution Degree : 3 Conforming To IEC 60664-1
 • Cut-Out Dimensions : 68 X 68 mm
 • Ambient Air Temperature For Storage : -55-85 °C
 • Relative Humidity : 95-95 % At 55-55 °C
 • IP Degree Of Protection : Ip40 On Front Face: Conforming To EN/IEC60529
 • Ip30 On Side Parts: Conforming To EN/IEC60529
 • IP20 On Connection Terminals: Conforming To EN/IEC60529
 • Compatibility Code : Rh99P
 • Test Function : Local
 • Remote Test
 • Electrical Shock Protection Class : Class Ii
 • Monitoring : Electronics (Continuous)
 • Power Supply (Continuous)
 • Relay/Sensor Link (Continuous)
 • [Uimp] Rated Impulse Withstand Voltage : 8 Kv
 • Width : 72 mm
 • Overvoltage Category : Iv
 • Depth : 78 mm
 • Tightening Torque : Auxiliary Power Supply: 0.6-0.6 N.M
 • Fault: 0.6-0.6 N.M
 • Relay Test And Fault Reset: 0.6-0.6 N.M
 • Sensor: 0.6-0.6 N.M
 • Voltage Presence: 0.6-0.6 N.M
 • Threshold Setting : 0.03...30 A Alarm
 • Minimum Load : 10 Ma At 12 V

Minimum sell quantity:

Order Quantity Multiple: